• Bu istasyon lehimleme el aparatı olarak WP 65 kullanmaktadır. El aparatının uç kataloğu (XNT Serisi) için tıklayınız.
• Bu istasyon vakum el aparatı olarak DSX 120 kullanmaktadır. El aparatının uç kataloğu (XDSL Serisi) için tıklayınız.

This station is ESD safe.

Dimension L x B x H:273 x 235 x 102 mm (10,75 x 9,2 x 4,02 inch)

Weight:approx. 6,7 kg

Channels:2

Net supply:230 V

Power supply:300 W

Protection class:I

Fuse:T500 mA (230 V / 50/60 Hz)

Fuse overcurrent release:1,6 A

Temperature control of channels:Soldering and desoldering tool, continuously 
variable from 50°C – 550°C (150°F – 999°F)

Temperature accuracy:± 9°C (± 17°F)

Temperature stability:± 2°C (± 4°F)

Bleeder:Soldering tip (Tip to ground) conforms IPC-J-001

Bleeder voltage:Soldering tip (Tip to ground) conforms IPC-J-001

Pump:(periodic duty 30/30s)

Max. vacuum:0,7 bar

Max. delivery rate:max. 10 l/min

Hot air:max. 15 l/min

Display:LCD

Temperature control:Buttons

Equipotentional bonding:Via 3.5 mm pawl socket at the back of device (hard grounded normal state)

USB interface:no

• 2 channel repair station

Technical data WP 65

Heating voltage:24 V

Heating output:65 W

Heat-up time:approx. 7s 50°C to 380°C (120°F to 660°F)

Temperature range:100°C – 450°C (212°F – 850°F)

Tip type:XNT series

• 30% faster heat up & up to 50% longer tip lifetime
  The new WP 65 soldering iron with automatic stand-by function and “Fast Response” and optimized sensor positioning allows lower solder temperatures combined with up to 50% higher tip lifetime. Allowing reduced operational costs and an increase in productivity. 
   

Fast Response Heating Technology

• Beneficial soldering tip prices
• Max. heating transfer
• Soldering tip in optimized sensor position
• Fast reaction time

Due to an optimized sensor position a high performance is given. With a wide range of beneficial soldering tips these tools are an alternative to the micro soldering irons.

Technical Data DSX 120

Voltage (heater):24 V

Heating output:120 W

Heat-up time:approx. 35 sec. 50°C – 350°C (120°F – 660°F)

Temperature range:100°C – 450°C (212°F – 850°F)

Tip type:XDS series

• 120 W powered an amazingly fast desoldering iron
  Extremely fast heat up, only 35 sec for ready to use (50°C – 350°C), up to 3 times longer life time of desoldering tip.